Info to the wswin-custom-x.html Stand: 08.04.2019


To ensure the successful and trouble-free operation of this finished custom file, some rules and basic settings must be observed in WSWIN.

1) Under> Weather Station> available sensors only tick the sensors that are actually supported by the weather station.
It makes z.b. There is no point in putting a tick on ID42 Solar if the weather station does not have a solar sensor.
   With such measures you bring the new "wswin-custom-x" completely out of step!

2) Enter under> Weather station> Special sensors> # 3> Time sensor> 34 rainfall.
   Set the hook at> 0.000 and> precipitation duration.

3) Under> Weather> Weather position> Measured values ??1> no check mark at: "Snow depth unknown".

4) Under> View> Settings> tick at: "show evapotranspiration course" (Davis).

5) Under> Weather> Weather forecast> Tick on: Forecast "show weather forecast".

6) Under> Internet> Settings> current.html the following values ??must be checked:
a) spend additional values ??in Bft in the wind
b) Wind direction with associated graphics
c) snowfall limit & cloud base
d) Sun, moon, statistics data (climate data), sea state: adoption of the settings as in current.html
e) Graph Cloud Lower Limit Cloud Temperature / Snowfall Limit: Apply the Cloud Lower Limit settings as in current.html

7) Under> Internet> Settings> Graphics> Tick on: "barotrend.gif"

8) Under> View> Day> 24h, check the view (under day view, erroneous forecasts and calculations may occur).

9) If there is no sunshine measurement (ID37), the weather forecast can not be displayed.

10) All sensors or calculations that are either not available or not currently in use are disabled.

11) "Snow height display" as well as "Warnings against snow drifts" only work if a snow depth has also been entered.
     Current snow depth graphic linked in the snow depth icon (only if the snow depth graph has been created as well).

12) "GLFI" & "WBI" show usable values ??only after a few days - and only after 30 days exact values. The script collects
     active the evaporation values ??of the last 30 days, since these are not stored in the data memory.

13) If bottom sensors are displayed, although none are available, they must be deactivated.
    Under> Weather Station> Special Sensors> # 1 Sensors Bottom temp. enter "not available".

14) Windchill formula: WSWIN can use both the old and the new formula. The new toilet formula is more realistic, in my opinion
    does not deliver as extremely low temperatures as the old WC formula.
    Setting: Under> Weather Station> Special Sensors> # 1> Sensor Windchill Hook at:> use new windchill calculation.
    Otherwise, the old WC formula will be used automatically.

15) Rainy Season Minimum requirements: DIV = <5 min; RMA = <0.3mm; 24h-View

16) Under> View> Settings> no year file, activate (do not tick)

17) Under> Weather> Static data> Settings> Hook when calculating Evapotranspiration

18) Under> Weather> Static data> Settings> Store statistical data (long-term average values ??for months and years)



---------------

Note: after the settings WSWIN shut down and restart!

---------------

Error without active error message:
If existing sensors (additional sensors) are not displayed in the file, the activation is missing as an HTML file:
Under> Internet> Settings> Sensors, check the appropriate hooks> HTML.

---------------

List of supported additional sensors:
Temp.2 A. ID3; Humidity2 A. ID19; Solar ID42; UV ID41; Floor sensor + 5cm, floor sensor -xcm; Leaf moisture ID25; Soil moisture ID29

---------------

List of "calculated values":
Calculated values ??without sensor ID; Calculated radiation values; met. Temperature sums; swell; Snow depths; lowest night temperature;
Horizon sight distance new calculation + visibility scale; Precipitation description; Sonnschein time scale; UV exposure scale;
Schwülegradskala; Garden humidity scale; Rainy season 24h / today; Cloudline / Snowline scale;

List of warnings:
Fog warning night / morning; Actual fog warning; Sturmwwarnung; Thunderstorm Warning; Heavy rain warning; Ice warning; GLFI + WBI;
Warning of snowdrifts;

---------------


Start the "wswin-custom-x.html": Under> Internet> Settings> current.html> Hook at the bottom of "wswin-custom-x" set.
The finished file is then stored under the same name in the HTML folder.


---------------
---------------